• Interior design decoration of structure of twisted Bridge. Structure in Dubai, United Arab Emirates or UAE. Wooden floor in tunnel. Architecture background. Hall corridor in futuristic empty room.

Amụma Mwepụta Mpụga Mpụga Mpụga Mpụga Mgbochi Wall Sistemu Igwe Igwe ejikọtara ọnụ

Amụma Mwepụta Mpụga Mpụga Mpụga Mpụga Mgbochi Wall Sistemu Igwe Igwe ejikọtara ọnụ

Nkọwa dị mkpirikpi:

  • Akụkụ:ahaziri, Dị ka onye ahịa si kpọmkwem chọrọ.
  • Ihe:Aluminom alloy profaịlụ
  • Ọkpụrụkpụ mgbidi profaịlụ:2.0-3.0mm
  • Nhọrọ iko:Igwe anaghị agba nchara, iko laminated, iko dị ọkụ, iko dị ala, iko sere n'elu, iko na-egosipụta otu glazing / okpukpu abụọ glazing
  • Otu:4/5/6/8/10/12mm
  • Ugboro abụọ:4+9A/12A +4 5+9A/12A+5 6+9A/12A+6 8+9A/12A+8, 6.38mm, 8.76mm 10.76mm 11.52mm etc
  • Agba:nke doro anya, na-egbuke egbuke na-acha anụnụ anụnụ, na-atụgharị akwụkwọ ndụ akwụkwọ ndụ, LOW-E.wdg Ọ bụla ọzọ iko ọkpụrụkpụ dị ka ndị ahịa chọrọ.
  • Akụrụngwa:Aka, mkpọchi, eriri akara, mgbanaka esemokwu, wdg.Ogo dị elu emere na China / Germany (ROTO)
  • ihe ndi ozo:Osisi mgbochi ọkụ, mkpanaka ụfụfụ, akụkụ ígwè.teepu nrapado nwere akụkụ abụọ, ihe mkpuchi ihu igwe
  • Emecha:Ekpuchiri ntụ ntụ, Fluorocarbon, na Anodizing
  • Ebe ọdabara:Ụlọ akwụkwọ, ụlọ oriri na ọṅụṅụ, ụlọ azụmahịa na ebe obibi wdg
  • Nkwakọ ngwaahịa:Akpa afụ + Osisi osisi
  • Nkọwa ngwaahịa

    Mkpado ngwaahịa

    Njirimara nke mgbidi ákwà mgbochi jikọtara ọnụ

    Ihe ndị bụ isi na-eduga na mgbagha nke isi ihe owuwu nke obodo bụ: mmejọ ihe owuwu nke ihe owuwu obodo, nkwụsị na-enweghị isi, ịdị adị nke microseismic mgbe ejiri ya mee ihe, nrụrụ na ala ọma jijiji.A na-etinye mgbidi ákwà mgbochi jikọtara ọnụ site na oghere dị n'etiti efere ọ bụla dị n'akụkụ ma nwee ezigbo mgbasawanye na ikike nrụrụ
    Otu efere nke ọ bụla nke mgbidi ákwà mgbochi jikọtara ọnụ bụ ihe zuru ezu, ya mere nkwụsịtụ nke akụkụ nke ọ bụla dị ntakịrị, na iguzosi ike n'ezi ihe nke efere ahụ ka nwere ike ijide n'aka mgbe mgbasawanye na nrụgharị ahụ gasịrị.
    Ebe ọ bụ na a na-agbakọta unit ahụ na ụlọ ọrụ mmepụta ihe na enwere ike itinye ya ozugbo mgbe ebufere ya na saịtị ahụ, na-enweghị ogide ọtụtụ ohere na saịtị ahụ na naanị ihe dị ka 30% nke mgbidi mgbochi mkpisi, nke na-ezere stacking ogologo oge na n'ụzọ dị irè na-ebelata ọnụ ọgụgụ ọnwụ nke ngwaahịa emechara ọkara.

    DYS-TH-001

    Àgwà ọma nke mgbidi mgbidi etiti ekpughere ekpughere ọnụ, mgbidi mkpuchi etiti ezoro ezo, ejikọtara ọnụ mgbidi mkpuchi etiti ọkara zoro ezo.

    01

    A na-emecha efere otu n'ime ụlọ ọrụ mmepụta ihe yana ezigbo mgbakọ dị elu.

    02

    Ngwa ngwa nrụnye ngwa ngwa, obere oge ihe owuwu, dị mfe ichebe ngwaahịa emechara.

    03

    Enwere ike ịrụ ya n'otu n'otu na isi ihe owuwu obodo, nke bara uru iji belata oge ihe owuwu ahụ dum.

    04

    Ihe owuwu ahụ na-agbaso ụkpụrụ nke nkwụsịtụ nzọụkwụ site na nzọụkwụ, na usoro mmiri mmiri na-edozi n'ime ya, nke na-arụ ọrụ dị mma nke igbochi mmiri ozuzo na ikuku infiltration.

    05

    A na-eji eriri roba pụrụ iche na-egbochi ịka nká mechie nkwonkwo efere, nke na-eme ka mgbidi ákwà mgbochi ahụ nwee ọrụ na-ehicha onwe ya na elu adịghị emetọ ya.

    06

    Ejikọtara efere ndị ahụ site na grafting efere, nwere ikike seismic siri ike

    Nke nwere onwe nkeji mgbidi ákwà mgbochi iko

    Ngwaahịa ọkọlọtọ

    Enwere ike itinye ya ma kesaa ya n'efu

    Atụmatụ nhazi

    A na-etinyekarị iko ahụ n'ikuku ikuku site na efere nko dị n'akụkụ anọ.Nhazi nke ihe mkpuchi ihe na-eme ka ihe owuwu ahụ nwee ọrụ nchekwa nchekwa abụọ

    Mmetụta ụlọ

    Akara anya dị n'èzí dị nkenke ma dị ndụ, nwere ikike dị mma

    Ngwa

    Ọ nwere ike nweta nnukwu efere nkebi, nke kwesịrị ekwesị maka ọdụ ụgbọ elu, ụlọ ngosi ihe ngosi na nnukwu ụlọ ndị ọzọ

    Ụkpụrụ nhazi

    1.kpọkọta onye ọ bụla mmewere (mullion, kehoraizin frame) n'ime unit akụrụngwa etiti na factory, na wụnye ákwà mgbochi mgbidi panel (iko, aluminum efere, nkume, wdg) na kwekọrọ ekwekọ ọnọdụ nke unit akụrụngwa etiti na-etolite element composites.

    2.Bufee mgbakọ akụrụngwa na saịtị ahụ ma dozie ya ozugbo na isi ihe owuwu site n'ịkwalite elu.

    3.The elu na ala okpokolo agba (ekpe na aka nri okpokolo agba) nke ọ bụla unit akụrụngwa na-etinyere na-etolite a Nchikota mkpara na mezue nkwonkwo n'etiti unit components, emecha na-etolite dum ákwà mgbochi mgbidi.

    DYS-TH-008
    DYS-TH-009

    Mkpọgidere na otu ákwà mgbochi ọnụ ụzọ eruba mgbidi

    DYS-TH-002G
    Stick and unitized curtain wall flow chart (1)

    Mbuli mgbidi ákwà mgbochi jikọtara ọnụ

    Stick and unitized curtain wall flow chart (3)

    Nwụnye mgbidi ákwà mgbochi

    Stick and unitized curtain wall flow chart (2)

    Mbuli mgbidi ákwà mgbochi jikọtara ọnụ

    Stick and unitized curtain wall flow chart (4)

    Nwụnye mgbidi ákwà mgbochi

    Ọrụ mgbochi mmiri

    DYS-TH-004
    DYS-TH-003G2

    Ntuziaka igbapu

    DYS-TH-005G1

    *Mgbidi ákwà mgbochi dị n'otu na-anabata "ụkpụrụ isobaric", arụmọrụ mmiri adịghị mma

    Ihe mkpuchi mkpuchi nke mgbidi ákwà mgbochi jikọtara ọnụ

    DYS-TH-006cs2
    DYS-TH-007cs3

    Mgbidi ákwà mgbochi na ule iko

    Mgbidi ákwà mgbochi na-achọ ọrụ ọkụ, ihe nkwụsị nke nnyefe ekwesịghị ịbụ ihe na-erughị 0.45.Mgbidi ákwà mgbochi nwere mkpa ịkpa ókè agba, ntụle anya agba ya ekwesịghị ịdị ala karịa Ra80
    Mgbidi ákwà mgbochi ahụ ga-enwe ike ịkwado ibu ya na ịdị arọ nke ngwa dị iche iche dị na nhazi ahụ, a pụkwara ịdabere na ya na-ebufe ya na isi ihe owuwu.
    Ntugharị kachasị nke onye otu nrụgide kwụsiri ike n'ime ogologo na nsọtụ abụọ nke otu panel n'okpuru ọkọlọtọ nwụrụ anwụ ekwesịghị gafere 1/500 nke ogologo na nsọtụ abụọ nke panel ahụ, ọ bụghịkwa gafere 3mm
    Ekwesịrị ịhazi iko mgbidi ákwà mgbochi site na itinye ọkụ.Ọgwụgwọ okpomọkụ nke abụọ, ọgwụgwọ ikpo ọkụ, ọgwụgwọ detonation, "mgbe ọgwụgwọ gasịrị nwere ike ịbụ ihe na-erughị 1/1000 nke ọnụ ọgụgụ mgbawa onwe" a na-ejikarị eme ihe na injinia.

    DYS-TH-010
    DYS-TH-011
    DYS-TH-012
    DYS-TH-013
    DYS-TH-014
    DYS-TH-015
    DYS-TH-017
    DYS-TH-016

    Nkwakọ ngwaahịa & mbupu

    DYS-TH-018
    DYS-TH-019
    DYS-TH-020
    DYS-TH-021

    Nhazi ahaziri n'efu

    Anyị na-emepụta ụlọ mmepụta ihe mgbagwoju anya maka ndị ahịa na-eji AutoCAD, PKPM, MTS, 3D3S, Tarch, Tekla Structures (Xsteel) na wdg.

    curtainwalldetails_26543
    Curtain-Wall-Details-Autocad-DWG-File
    curtain_wall_dwg_detail_for_autocad_37128

    Usoro nhazi

    dexing

    Nchịkọta Ụlọ Ọrụ Mmepụta

    Iron Workshop

    Ụlọ ọrụ ígwè

    Raw Material Zone 1

    Mpaghara akụrụngwa 1

    Aluminum alloy workshop

    Ụlọ ọrụ aluminom alloy

    Raw Material Zone 2

    Mpaghara akụrụngwa 2

    Robotic welding machine installed in new factory.

    Igwe ịgbado ọkụ nke robotic arụnyere na ụlọ ọrụ ọhụrụ.

    Automatic Spraying Area

    Mpaghara ịgbasa akpaaka

    Multiple cutting machines

    Igwe ọkụ otutu otutu

    Ikike asambodo

    certificate1
    certificate2
    certificate3
    certificate4
    certificate5
    certificate6
    certificate7
    certificate9
    Certificate8

    Ụlọ ọrụ nkwado

    Cooperative company (1)
    Cooperative company (10)
    003G
    004GG
    005G
    Cooperative company (9)
    Cooperative company (4)
    009G
    008G
    Cooperative company (6)

    FAQ

    1.What bụ gị mmepụta oge?
    Ụbọchị 38-45 dabere n'ụgwọ ego enwetara na eserese ụlọ ahịa bịanyere aka na ya

    2. Gịnị na-eme ka ngwaahịa gị dị iche na ndị ọzọ na-ebubata?
    Kpọmkwem njikwa mma yana ọnụ ahịa asọmpi yana ahịa ndị ọkachamara na ọrụ injinia nrụnye.

    3. Kedu ihe mmesi obi ike nke ị nyere na otu esi ejikwa àgwà?
    Ewubere usoro iji lelee ngwaahịa n'oge ọ bụla nke usoro nrụpụta - akụrụngwa akụrụngwa, ihe eji arụ ọrụ, ihe enwetara ma ọ bụ nwalere, ngwaahịa emechara, wdg.

    4. Kedu ka esi enweta nkwuputa ziri ezi?
    Ọ bụrụ na ị nwere ike ịnye data ọrụ ndị a, anyị nwere ike ịnye gị ngụ ziri ezi.
    Ụkpụrụ imewe/koodu imewe
    Ọkwa kọlụm
    Ọsọ ifufe kacha
    Ibu seismic
    Ọsọ snow kacha
    Oke mmiri ozuzo


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya